Advanced Settings
26
Setting Item
Default Value Setting Details
Surround
80Hz(THX)
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
r
"Full Band" can only be set if "Front" is set to "Full
Band".
Back
80Hz(THX)
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
r
In any of the following cases, this setting will be
set to "None".
– "Surround" is set to "None".
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
r
"Full Band" can only be set if "Surround" is set to
"Full Band".
Back ch
2ch
Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect to
the BACK L terminal)
"2ch": When two speakers are connected
r
The setting cannot be changed if "Back" is set to
"None".
Wide
None
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
r
In the following cases, the setting will be set to
"None":
– "Surround" is set to "None".
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes".
r
"Full Band" can only be set if "Front" is set to "Full
Band".
Setting Item
Default Value Setting Details
Height
None
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
r
In any of the following cases, this setting will be
set to "None".
– "Speaker Settings" - "Height Speakers Type" is
set to "Not Use".
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
r
If any type is selected in "Speaker Settings" -
"Height Speakers Type", this setting will be set to
"80Hz(THX)" as default value. In this case, this
setting cannot be set to "None".
r
"Full Band" can only be set if "Front" is set to "Full
Band".
LPF of LFE
120Hz
Set the low-pass filter for LFE (low-frequency effect)
signals in order to pass lower frequency signals than
the set value and thus cancel unwanted noises. The
low-pass filter will be effective only on sources with
LFE channel.
Set a frequency from "80Hz" to "120Hz".
"Off": Do not use this function
Subwoofer Phase
0°
You may feel the output of the bass sound is weak
depending on the music you are listening to or your
listening position. In such case, try changing the
phase of subwoofer. You can listen to music which
allows you to choose your preference.
"0°": Inverts the phase of subwoofer.
"180°": Not invert the phase of subwoofer.
r
The setting cannot be changed if "Subwoofer" is
set to "No".
