Integra DTR-40.2, Инструкция по эксплуатации

Страница: 49 / 104

49
En
HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to
HDMI
IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input
selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, composite video, S-video and component
video sources can be upconverted
* and output by the
HDMI output. You can set this for each input selector by
selecting the “
- - - - - ” option.
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , PC ,
TV/CD , PHONO , PORT

HDMI1 , HDMI2 , HDMI3 , HDMI4 , HDMI5 ,
HDMI6 :
Select the HDMI IN to which the video component
has been connected.

- - - - - :
Output composite video, S-Video, and component
video sources from the HDMI output. The video out-
put signal from the HDMI output is the one config-
ured in “Component Video Input” (
➔
49
).
• “ AUX ” is used only for input from the front panel.
• Each HDMI input cannot be assigned to two input selec-
tors or more. When HDMI1 - HDMI6 have already
been assigned, you must set first any unused input selec-
tors to “
- - - - - ” or you will be unable to assign HDMI1
- HDMI6 to input selector.
Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the “ HDMI Input ” setting must be
set to “ - - - - - ”. See “Video Connection Formats” for more infor-
mation on video signal flow and upconversion (
➔
22
).
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of “
Component Video Input ”.
• When an
HDMI IN
is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio Input” (
➔
50 ). In this case, if you want to use the coaxial
or optical audio input, make the selection in the Audio Selector
in the Home menu (
➔
26 ).
• “ TUNER ” selector cannot be assigned and is fixed at the
“ - - - - - ” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to “ PORT ” selector.
• Do not assign the component connected with the HDMI input to
“ TV/CD ” selector when you set “ TV Control ” setting to “ On ”
(
➔
62 ). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2 , you must assign “ IN2 ” to
the “ BD/DVD ” input selector.
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , PC , AUX ,
TV/CD , PHONO , PORT

IN1 , IN2 , IN3 :
Select a corresponding component video input that
the video component has been connected.

- - - - - :
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT , for the
output from composite video, S-Video, and compo-
nent video sources.
Note
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the
UNIVERSAL PORT
jack, you cannot assign any
input to “ PORT ” selector.
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
PC HDMI5
AUX FRONT (Fixed)
TUNER - - - - - (Fixed)
TV/CD - - - - -
PHONO - - - - -
PORT - - - - -
IN
OUT
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
Input selector Default assignment
BD/DVD IN1
VCR/DVR - - - - -
CBL/SAT IN2
GAME IN3
PC - - - - -
AUX - - - - -
TUNER - - - - - (Fixed)
TV/CD - - - - -
PHONO - - - - -
PORT - - - - -