26
> Before start
> Hookup
> Setup
> Playback
> Part Names
Multi-zone
Play
1. Switch the remote controller to the mode for
controlling ZONE 2 or ZONE 3.
To switch to the mode for controlling ZONE 2,
while holding down Mode (a) on the remote
controller, press Zone 2 (b) for 3 or more
seconds until the remote indicator blinks
twice.
To switch to the mode for controlling ZONE 3,
while holding down Mode (a) on the remote
controller, press Zone 3 (c) for 3 or more
seconds until the remote indicator blinks
three times.
2. Point the remote controller at the main unit
and press
Í
(e).
"Z2" or "Z3" lights on the main unit display.
3. Press the input selector button (f) of the input
to be played in the separate room. On the
main unit, after pressing Zone 2 or Zone 3,
within 8 seconds press the input selector
button to select the input to be played in the
separate room. To play the same source in
the main room and separate room, press
Zone 2 or Zone 3 on the main unit twice.
0
You cannot select different stations for the
main room and separate room with the AM/
FM radio. When you select the station for
the separate room, the main room also
switches.
0
DSD and Dolby TrueHD audio signals are
not output to ZONE 2/ZONE 3 when
selected with the "NET" input selector.
4. To adjust the volume on the power amplifier in
the separate room or the ZONE Speaker,
adjust with VOL+/– on the remote controller.
To control on the main unit, press Zone 2 or
Zone 3 and adjust with the Master Volume
control within 8 seconds.
0
The information for a connected device can
be displayed on the TV screen in a separate
room. Press the
button while the remote
controller is in the mode for controlling ZONE
2.
0
Power consumption in standby mode
increases when the multi-zone function is
being used.
To turn off the function
Press
Í
while in the mode for controlling ZONE
2 or ZONE 3 on the remote controller.
Playing in ZONE 2 or ZONE 3 only
If you turn the unit to standby during multi-zone
playback, the Z2 or Z3 indicator is dimmed and
the playback mode is switched to playback in a
separate room only. Setting ZONE 2/ZONE 3 to
on while this unit is in standby will also switch
the playback mode to the same setting.
WHOLE HOUSE MODE
If you press Whole House Mode while playback
is being performed in the main room, the
WHOLE HOUSE MODE is turned on, "Z2" and
"Z3" on the display light at the same time and
the playback sources of all the rooms are
switched to the same source at once.
0
The sources that can be played in ZONE 2
can be played in all rooms.
0
This function cannot be used if headphones
are connected or audio is output from the
speakers of the TV.
Settings
Settings are required in Initial Setup, "4. Multi
Zone Setup" (
P22) to use the multi-zone
feature. When checking the setting content,
refer to the following, press
on the remote
controller, and check in the Setup menu that is
displayed.
– When you have connected a TV in the
separate room with an HDMI cable, have you
selected "Use" in "1. Input /Output Assign" –
"TV Out/OSD" – "Zone2 HDMI"?
– When you are playing the audio from an AV
component with an HDMI cable in the
separate room, have you selected "Use" in "1.
Input /Output Assign" – "TV Out/OSD" –
"Zone2 HDMI"?
– When you have connected speakers in a
separate room with speaker cable, have you
selected "Zone 2" or "Zone 2/Zone 3" in "2.
Speaker" – "Configuration" – "Zone
Speaker"?
– When you have connected a power amplifier
in a separate room with an analog audio
cable and you want to control the volume with
this unit, have you selected "Variable" in "7.
Multi Zone" – "Zone 2" or "Zone 3" – "Output
Level"?
To return the remote controller to main
room control mode:
While holding down
Mode (a) on the remote controller, press Main
(d) for 3 seconds or more until the remote
indicator flashes once.
e
f
a
b
c
d
SN29402430_DRX-7_BAS_En_1606XX.book 26 ページ ２０１６年６月１４日 火曜日 午前１１時４分