background image

37

Front Panel

   Rear Panel

   Remote

Contents 

  

Connections

 

  Playback 

  Setup 

Connecting Playback Devices

Connecting an AV Component with HDMI Jack Mounted

This is a connection example of an AV component equipped with an HDMI jack. 

When connecting with an AV component that conforms to the CEC (Consumer 

Electronics Control) standard, you can use the HDMI CEC function (*) that 

enables linking with input selectors, etc. and the HDMI Standby Through function 

that can transmit video and audio signals of the AV component to the TV even if 

this unit is in standby mode.

• 

To play 4K or 1080p video, use a high speed HDMI cable.

Setup

• 

The HDMI CEC function and HDMI Standby Through function are 

automatically enabled if you select "Yes" for "5. ARC Setup" in Initial Setup  

p132

). If "No, Skip" is selected, settings are required in the Setup menu 

after Initial Setup is completed. Press 

 on the remote controller, and select 

"6. Hardware" - "HDMI" to make the settings. ( 

p116

)

• 

To enjoy digital surround sound including Dolby Digital, set the audio output of 

the  connected Blu-ray Disc player etc. to the Bitstream output.

 

(*)The HDMI CEC function: This function enables various linking operations 

with CEC-compliant devices, such as switching input selectors interlocking with 

a CEC-compliant player, switching audio output between TV and this unit or 

adjusting the volume using the remote controller of a CEC-compliant TV, and 

automatically switching this unit to standby when the TV is turned off.

a

 HDMI cable

a

Streaming media 

player

GAME

BD/DVD

Cable/Satellite 

set-top box

Содержание DRX-2.3


























































































































































Отзывы: