Intec CVMHDVR706, Руководство оператора, Страница: 9 / 86

8
Do NOT install the camera in any area that allows it to extend out past the vehicle as this can
cause injury if it were to come in contact with people walking around the vehicle.
Never use fuses of a larger rating than those supplied with your Car Vision® System. Use of larger
rated fuses can cause excessive current through the system, and if a short occurs, could lead to a
fire.
Confirm that the orientation of the image on the display is proper. Rear facing cameras should
yield a mirror image, where items on the left of the vehicle appear on the left side of the monitor.
1.4
Cautions
Before you begin driving, be sure the display controls are adjusted properly and all camera views
are appropriate. This will avoid unnecessary distractions while driving.
When installing the camera system, be certain that all items are secure. Items that are not secure
or mounted in an unstable manner can come loose and cause damage or personal injury.
Do NOT attempt to open or service your equipment. Removal of the product enclosure can lead to
electrical shock. There are no user serviceable parts inside.
You should not attempt to make any adjustments to the Car Vision® System while driving as this
can lead to an accident. Make all adjustments prior to operation. To make adjustments en route,
move to the nearest safe location and stop first.
Keep the Car Vision® System clean and free from dirt, snow and ice. If the camera glass or
display panel becomes dirty, clean them before use. If they are covered with snow and/or ice, they
should be cleared off before use. Failure to do so could lead to an accident.
When running a cable from the exterior to the interior of a vehicle, care needs to be taken to seal
the entry point. Failure to do so could allow exhaust fumes, other toxic gases, or water to enter.