© INTEC Video Systems, Inc.
Revision H May 2013
12
CVR500 (Multi Channel Remote)
- Manually turns the display on
or places it in standby.
- Accesses the on-screen menu.
- Continue pressing Menu to scroll
through the menu items.
- Adjusts the radar audible alert
between three available preset
levels. (Active when used with a
compatible radar system).
- Increases screen brightness.
- Increases the value of a menu
item.
- Decreases screen brightness.
- Decreases the value of a menu
item.
- Selects the external video input.
(Must be set to on before it can be
selected).
- Accesses the multi camera
screens
- Skips to the next Character
when naming camera positions.
- Manually Selects Camera 1
- Selects the next page while
displaying the menu
- Manually Selects Camera 2
- Selects the prior page while
displaying the menu
Manually Selects Camera 3
Manually Selects Camera 4
Manually Selects Camera 5
Allows the user to Cycle through
the connected cameras.
MENU
CH5
+
Press both buttons simultaneously
to access the Installer Menu.
Press both buttons simultaneously
to access the Installer Menu.
(Version 2.2.0 Only)
Radar Operation
The integrated radar, when properly connected, will
send a visual alert to the Car Vision
®
display and an
audible alert to the Car Vision
®
remote when an
object is detected within its operating range. The
visual alert consists of light pipes on the left and right
sides of the display screen. When properly connected
and powered green lights at the top of the light pipes
will illuminate, indicating the radar is active. When an
object is detected in the outer most detection area,
the first of 5 red lights will illuminate starting at the top
of the light pipes, just under the green lights. As the
object gets closer to the radar sensor(s) additional
red lights will illuminate in succession from the top of
the screen to the bottom as well as start flashing and
an audible beeping will be heard through the remote.
While in reverse, the on-screen distance grid will also
flash off and on according to the detected object’s
distance from the sensor.
(See figure 1)
The integrated radar will only operate when it is
connected via an INTEC cable to camera positions 1
or 2. Radar connected to camera position 1 is active
only when triggered automatically via a +11 to +32
VDC source. Radar connected to camera position 2
is active at all other times when power is applied to
the camera system.
(Figure 1)
In addition to the audible and visual alerts provided
by the display and remote the system also provides
a 1 Amp source voltage alarm output from the
controller power harness that can be used to
activate lights, alarms or other warning devices to
alert the operator or those around the vehicle of
objects within the radar detection zone.
