3 Loop (GigE)
16
ARGUS
3 Loop (GigE)
This Loop will take all incoming Ethernet frames at Layer 1 (L1) and send them back to the
sender unchanged.
In the case of a Loop on Layer 2 (L2) of the OSI model, the ARGUS swaps the source MAC
address with the destination MAC address and then sends all the incoming Ethernet
frames back.
Depending on the speed of the remote end, it is possible to Loop data rates up
to 1 Gbit/s.
The following parameters are required for the Loop:
Protocol-independent parameters:
ARGUS - Status screen
In this example: Ethernet access
Test parameters
Continuation on
next page
Select a profile for editing. The
selected profile will be marked blue
in the display. The default profile
will be marked in the display with a
. The ARGUS will use the
parameters in the default (preset)
profile to setup the Ethernet
connection and the Loop.
The ARGUS will use the marked
profile as the default profile and
return to the Settings menu.
