AirSense
Model I-310en Operator’s Manual
10/16/11
Page:
14
Disclaimers and Notices
Operational Limitations
The standard Model I-310en has the following operational
limitations:
1. The unit is not intended for routine operation at CO
2
concentrations below 400 ppm.
2. The unit expects to see outside-air CO
2
concentrations
for at least a few hours every few weeks.
For CO
2
sensing applications where these two limitations
can not be met, contact the factory for guidance
on achieving maximum accuracy under these conditions.
Safety Critical Applications
These products are not designed, intended or authorized for
use in life safety systems or devices where failure of the
Model I-310en to perform to specification may be reasonably
expected to result in significant risk of injury or death.
INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | 111011 | PRE 200217 | Page 17 of 17
I-310eN – UserManual
