Inta Kiko DELUXE KIKOD20, Инструкция по установке и обслуживанию

Страница: 12 / 30

© Intatec Ltd 2017
11
Plaster guard
• Check all joints for leakage before embedding into the wall or concealing the valve.
• Screw the extension pieces (18) into the two threaded holes.
• Place the thermostatic cartridge extension (19) over the flow cartridge spindle.
• Place the flow controller cover (20) over the flow control valve and secure with retaining
screw (22).
• Fit the plaster guard (21) over the valve and secure with two retaining screws (22).
• For a solid wall embed the pipes and shower valve with plaster.
• Finally finish the wall with plaster and plaster up to and around the plaster guard.
• When the plaster is dry remove the plaster guard or if a tiled wall leave in position and tile
around the guard.
• Finally remove the retaining screws and remove the plaster guard.
18
19
20
21
22