Inta HIPER-V3 DIRECT, Руководство по установке

Страница: 5 / 15

Section 4 - Technical Data
Page 5
05/20 E&OE
HIUV3 - 40 Data
Maximum operating pressure bar 10
Maximum Hot Water Flow Rate l/min 14 to 18
Maximum District Flow Rate l/min 18
Maximum Pressure differential bar 3
Weight (empty/ installed) kg 21
Available Settings
Temperature of Heating – Low Mode ºC 30 – 45
Temperature of Heating – High Mode °C 30 – 80
Temperature of Hot Water ºC 40 – 60
Hot Water Performance 40 Plate
10°C to 50°C at 14 l/m Kw
Primary Flow 0.266 ltrs /sec
50kW
Max DHWS Flow Ltrs/min 18
Min DHWS Pressure bar 1.5
Max Hot water temperature 10 bar
Heating Performance
At 18l/m and Δ T of 15°C kW 15
‘ District ’ Heat Provision
Maximum Inlet Temperature ºC 85
Minimum required ‘ District ‘ flow
rate @ 80°C to provide Hot Water
10 to 50°C at max flow rate l/min 9.36
Minimum required ‘ District ’ flow
rate @ 70°C to provide Hot Water
10 to 50°C at max flow rate l/min 11.98
Maximum Pressure 10 bar
Electrical Data
Electrical Supply 230V AC 50Hz 1Ph
Power consumption full load watts 105
Connection Data
‘ District ’ Inlet and Outlet 3/4” Male BSP
Heating System Inlet and Outlet 3/4" Male BSP
Cold Water Inlet / Hot Water Outlet 1/2" Male BSP
- V3 DIRECT