ENGLISH
Quick Installation Guide
MRX LTE
Mat. no. 10017059 – version 27 July 2017 11:34:47 – Subject to technical changes and correction
www.insys-icom.com
IP address in configuration network
The IP address of the router in the configuration network does only have to be changed,
if the IP address is already used or a different address range is required. Then, the web
interface is immediately accessible under the new address.
1.
Menu Interfaces > IP net 1: Adjust IP address of the router in configuration network
2.
Store settings in profile with
Save settings
and activate profile with
.
3.
Adjust IP settings of the PC for further configuration accordingly, if these are not
obtained automatically (see step B)
4.
Menu Services > DHCP Server: Adjust address range to the configuration network, if
the DHCP server of the router is used
Resetting the router
If it is necessary to reset the router during configuration, this is possible without losing
the settings.
1.
Menu Administration > Reset:
2.
Click on
Reboot device now
Alternatively, press reset key on the device front once for a short time (soft reset)
Resetting the router to default settings
If the router is to be reset to default settings, it can be reset to delivery state.
1.
Menu Administration > Reset: check all options
2.
Click on
Reset now
Alternatively, press reset key on the device front three times for a short time within
2 seconds
Resetting and initialising the router
If the router is not available any more for any reason, it can be reset and initialised
(settings do not get lost).
1.
Press reset key on the device front for at least 3 seconds (hard reset)
Configuration Guides and manuals for integrating your product into your
application are available in the menu Support and Downloads
http://www.insys-icom.com/support
For interesting information about your product refer to our website in the menu
Knowledge Base
http://www.insys-icom.com/knowledge
Hereby, INSYS Microelectronics GmbH declares that herein described device types are in compliance with Directives 2014/53/EU
and 2011/65/EU. The full text of the EC Declaration of Conformity is available under www.insys-icom.com/manual.
