Modem Configuration
INSYS Modem 336 LL
i-modul Modem 336 LL
8
Aug-06
Note
PING mode will work with all buffered modes. It will not work with
direct mode (
AT\N1
).
2.4
Status Transmission of the Digital Inputs
If ping mode is activated (see Chapter 2.3), the status of the alarm inputs is automatically
transmitted to the switch outputs of the other modem, together with the ping mes-
sages.
A status change at one of the alarm inputs will automatically execute the sending of a
ping packet to the remote terminal. The maximum transmittable frequency is at ap-
proximately 0.5 Hz, i.e. the transmission may only be used for slowly changing status
lines.
2.5
Remote configuration
If connection safeguard is activated (see Chap. 1.3), this may result in problems during
the processing of AT commands in remote configuration mode.
For this reason, the connection safeguard should be deactivated at both modems prior to
the configuration.
Switching to command mode
<Pause>+++<Pause>
Deactivating the connection safeguard (local)
ATS8=0
Switching to remote configuration mode
<Pause>****<Pause>
Deactivating the connection safeguard (remote)
ATS8=0
Configuring the remote modem …
AT…
After the configuration, you can reactivate the connection safeguard at both modems
with
ATS8=3&W
(default).
