EloStar Master 3X0 / 4X0 / - smart
System Description
Manual V.1.03H
21
3.4
System Components
3.4.1
Operating Unit QPad EloStar Master
Not evaluated by UL. For systems EloStar Master, there is the membrane keypad
version, with straight or slanted front.
Fig. 5:
Fig. 5: Operating unit QPad EloStar Master
With operating unit QPad, set and operate system EloStar Master. The operating unit is
located outside the protected premises of the system. You can use one or two operating
units with one system. For a description of its control elements see
Variants:
QPad Business x00, (standard, with dependent OTC, without RFID)
QPad Business x40 for RFID, (13,56 MHz) / Mifare Classic and DESFire (HF)
3.4.2
Operating Unit FlatControl EloStar Master
Fig. 6: Operating unit FlatControl
With operating unit FlatControl, you can also set and operate system EloStar. The
operating unit is located outside the protected premises of the system. You can use one
or two operating units with one system. For a description of its control elements see
„Operating Unit FlatControl“ on page 48.
Within the context of this manual, there are the variants (up to firmware version EM22 all
of them can handle dependent OTC):
FlatControl EloStar Master x00 (standard,)
FlatControl EloStar Master x10 for RFID, (125 KHz) / Hitag
FlatControl EloStar Master x20 for RFID, Mifare Classic
