Instrutech ITC-1600, Руководство пользователя

Страница: 9 / 32

I
NSTRUTECH
C
ORPORATION
ITC-1600 U
SER
’
S
M
ANUAL
9
Minimum pulse width 150 ns
Input connector BNC on front panel
Maximum over voltage ±30 Volts D.C.
Analog outputs:
Number of channels 4, individual D/A converters
Output type pseduo differential, optically isolated
Type of DAC double buffered, multiplying
Output connector BNC
Resolution 24 bit converter, 16 bit data (1 in 65536)
Output range -10.24 to +10.239 volts
Conversion speed software selectable, minimum 5
µ
s each
Settling time <4
µ
s to 0.001%
Gain error 0.2% of FSR
Gain linearity <2dB
Drift ±4 ppm/ °C, after 10 minute warm up
Signal-to-noise ratio 116dB
Output impedance 10
Ω
(for output overload protection)
Short circuit to ground indefinite
Current output ±20mA maximum
Capacitance drive 200pF
Digital outputs:
Number 36, optically isolated
Output driver 3.3 Volt, TTL, LS, ACT, and HCT compatible
Output connectors 4 on front panel BNC with LED indicators
32 on rear panel connector
Sink output current 6.4 mA (front panel), 3.2 mA (rear panel)
Source output current 6.4 mA (front panel), 3.2 mA (rear panel)
Power-on state logic low
Trigger Out:
Number 1, optically isolated
Output driver 3.3 Volt, TTL, LS, ACT, and HCT compatible
Output connector BNC on front panel
Output current 6.4 mA sink or source
Dimensions:
Width: 19" (47.5cm), Height: 1.75" (4.375cm), Depth: 6" (15 cm),
Weight: 8 pounds (3.6 kg)
Power requirements:
85-264VAC, 47-440 Hz, 25 Watts