background image

7

• 

If the toggle is in the up position, a mono sum of the stereo signal 
present at the

 Stereo Line Input

 is the normalled input source of the 

Enhance Input

 and the 

Envelope Follower Input.

• 

If the toggle is in the centre position, input source normalling to the 

Enhance Input 

and 

Envelope Follower Input

 is muted.

• 

If the toggle is in the down position, the 

Microphone

 is the 

normalled input source of the

 Enhance Input

 and 

Envelope  

Follower Input

.

Microphone:

 On-board condenser microphone.

• 

The 

Microphone

 can be the normalled input source for the 

Enhance 

Input 

and the 

Envelope Follower Input

.

• 

làrachd 

has the same 

Microphone

 implementation as arbhar.

Enhance Input:

 Mono input for audio enhancement.

• 

Similar to arbhar and Lúbadh, 

làrachd’s Enhance Input

 is based on 

tangential distortion limiting circuitry (as used in tanh[3]). This circuit 
is used for soft clipping, limiting, and waveshaping. Further non-
linear shaping and gentle filtering is applied through this  
signal processor.

• 

If no signal is present at the 

Enhance Input

, either a mono sum of the 

signal present at the

 Stereo Line Input

 or the 

Microphone

 signal can 

be chosen as the normalled input source.

• 

If a normalled input source is active, patching a connection to the 

Enhance Input 

will break the normal.

Enhance Level: 

Manual level control for waveshaping over the signal 

present at the 

Enhance Input

 or the normalled input source.

Enhance Output:

 Mono output of the audio enhancement circuit.

Содержание Larachd

















Отзывы: