Instone INVENTOR PRO, Руководство пользователя

Страница: 21 / 23

- 21 -
Question 3:
The material does not stick to the glass board then becomes a mass, or fall off
for a while.
Causes Solutions
The temperature of glass board is not enough. High up the temperature or re-paint the
printing glue
The platform is not leveled correctly. Too
large gap between nozzle and platform.
Re-level the platform.
(With large gap, the filament can’t stick on
the board totally; with small gap, the risk of
nozzle stuck will be increased or even
broken the glass board. )
Remove the radiator and fan Figure 2
Clean the stuck material Figure3
Unblock test, if ok, install the right cover Figure4