Page 10 of 15 : 11/20/2012 4:14 PM
Red every tap
1 scene
Green every tap
2 scene Non-Toggle (Always On)
Green / red alternating
2 scene Toggle
Turn LED Off (or Back On)
1) Press and hold set button for 3 seconds - until you hear a beep
LED will begin blinking green
2) Press and hold set button a 2
nd
time for 3 seconds - until you hear a beep
LED will begin blinking red
3) Press and hold set button a 3
rd
time for 3 seconds - until you hear a beep
LED will begin blinking green
4) Press the appropriate area of the paddle for the desired button/scene configuration
Desired LED Mode
Button to Press
LED Off
Bottom
LED On (default)
Top
Mini Remote will double-beep and its LED will turn off
Turn Beeper On (or Back Off)
By default, the beeper is disabled on Mini Remote. Follow these instructions to enable it:
1) Press and hold set until it beeps
LED will begin blinking green
2) Press and hold set button until it beeps again
LED will begin blinking red
3) Press and hold set button until it beeps a third time
LED will begin blinking green
4) Tap set button
LED will begin double-blinking green
5) Press the appropriate area of the paddle for the desired button/scene configuration
Mini Remote will double-beep and its LED will turn off
Desired Beeper Mode Area to Press
Off (Default)
Bottom
On
Top