This information given in good faith and is based on the latest knowledge available to InStar UK Ltd. Whilst every effort has been made to ensure that the contents of the publication
are current while going to press, customers are advised that products, techniques and codes of practice are under constant review and liable to change without notice.
InStar UK Ltd
, Holland House, Valley Way, Rockingham Road, Market Harborough, Leicestershire LE16 7PS | T: +44 (0)1858 456949 | E-mail: [email protected]
Installation Guide
Page 5
6. Additional Options
HOW TO CREATE A STEP
• Cut the profile at 45 degrees angle.
• Place a vertical junction angle bracket (outside the profile).
• Screw using the slotted holes and fix with the Profildeck® screw
4.8 x 19 mm.
HOW TO CREATE A STAIR RISER (2 OPTIONS):
On the decking side:
• Either, put some polyurethane glue on the central rail /
channel/ groove.
• Or, drill 5 holes with a 4 mm metal drill. Put some polyurethane
glue on the holes. Then, place the stair riser and press.
PU Glue
PU Glue
PFD
PROFILDECK ALUMINIUM SUB-FRAME SYSTEM
