Go to http://install.instar.com
2-EN
The IN-5907HD is the most flexible outdoor HD IP camera from INSTAR. Thanks
to a lot of optional accessories you can adjust the camera to your needs. There-
fore, it can be used in almost any kind of scenario. The alarm input also allows
you to use external alarm sensors such as a PIR sensor whereas the alarm out-
put offers you the possibility to connect a siren or other signaling devices to your
camera.
Equipped with an Omnivision Wide Dynamic Range HD CMOS Sensor, the IN-
5907HD is able to achieve the best image quality in high contrast lighting envi-
ronment both during the day and at night, resulting in accurate motion detection
and alarm notification.
This camera is running an embedded Linux Operating System. It provides a
built-in, modern Web User Interface (WebUI) with focus on usability and sim-
plicity, supporting all recent operating systems (Windows, MacOS, Linux,…).
Thanks to the built-in Camera Setup Wizard, INSTAR users can enjoy a very
easy initial set-up of the IP camera.
For your camera installation, please go to:
http://install.instar.com
1. Camera Introduction
Please note, that this user manual describes both, the Wifi and PoE version of
IN-5907HD. Therefore some sections in this user manual might only apply to the
Wifi and some only to the PoE model.