Page
2
of
3
Setting the Water Frequency
1.
Turn the dial to “FREQUENCY”
2.
Press “+” or “-“buttons to select the desired frequency.
3.
The watering frequency range is from 10 seconds to 7 days. The default
watering frequency is 1 day.
WATERING FREQUENCY CHART
10SECS, 30SECS, 1MIN, 3MINS, 5MINS, 1HR, 2HRS, 4HRS, 12HRS, 1DAY, 2DAYS, 3DAYS, 4DAYS,
5DAYS, 6DYAS, 7DAYS
Note: the timer will not run when the “RUN TIME” you set is greater than “FREQUENCY”
Once you have set all of the above, turn the dial to “RUN.” The timer will run as per your set times.
Setting a rain delay (Set up when raining to temporarily delay watering)
1.
Turn the dial to “RUN”
2.
Press “↑” button once to see the word “DELAY”
3.
Press “↑” button again to select the number of hours you would like to delay watering (e.g. 24, 48,
72 HRS)
4.
If no additional settings are made in 5 seconds, the timer will save the current setting and exit to the
home screen (clock)
5.
The screen will then flash between the clock and the rain delay time ( in hours)
6.
Turn the dial to “OFF” or “RUN” or set the rain delay time to “0” if you would like turn off the rain
delay function.
