7.0 TECHNICAL SPECIFICATIONS
Voltage:
400/430V 3-phase, 50/60 Hz
Supply:
AC
Amps:
30A per phase
Rated Input:
18.0 KW
Front fuses required:
3 x 32A
Mains Water Pressure:
Between 2.0 and 7.0 bar (28
– 96psi)
Fill type:
Automatic
Materials:
All non-metallic materials in contact with water are WRAS
approved
Max Draw-Off:
135 Litres (238 UK pints)
Recovery per minute:
3.4 Litres
Recovery to full capacity: 39 minutes
Draw-off speed:
135 Litres in 11 minutes (using both taps)
Heat up time from cold:
45 minutes (to full capacity)
Temperature:
98^C (factory set)
Width:
660mm
Height:
892mm
Depth:
550mm
Weight (empty):
52kg
Weight (full):
175kg
Machine construction:
Outer casing and tank constructed from combination of
type 304 and 316 stainless steel.
All boilers have electronic control of the main functions. This means that the
temperature is controlled precisely within given parameters. The circuit constantly
monitors the operation of the machine and warns the user via the service light if any
abnormal circumstances have been detected.
If the service light flashes refer to the diagnosis codes at the back of this manual.
Other technical information available:
Spare Parts List:
Order Ref:
INS-MOD18SP
Service/Maintenance Manual:
Order Ref:
INS-MOD18SVC
Please order direct from Instanta Limited, Spares Department: 01704 501114
