5
Installation instructions & user guide
T210042 InstaTap office manual v1.01 June 2022
Lifting
Take care when lifting. The InstaTap may exceed safe lifting
limits. If you feel this is beyond your personal capabilities, please seek
assistance with the lift. Do not lift the InstaTap by the front cover or any of
its connections.
Airflow
The InstaTap operates within the ambient temperature range 5ºC -
30ºC. Proper air circulation must be provided. The system will operate
satisfactorily only if the recommended air gaps are provided.
SECTION 2 IMPORTANT SAFETY INSTRUCTIONS
!
•
The InstaTap under counter boiler and under counter chiller must
be earthed, earthing is provided via the supplied power cord. The
resistance of the earth connection to each exposed metal part must be
less than 1Ω. Use the power cable supplied. It is the responsibility of the
installer to ensure the power point is earthed.
• All installation and service work must be completed by trained and
suitably qualified tradespeople. Faulty operation due to unqualified
persons working on this product, may void warranty coverage.
• As the installer, it is your responsibility to supply and install all valves as
required by local regulations and relevant standards.
• The InstaTap is rated for 220-240V 50Hz AC operation.
• Do not remove the cover of the under counter boiler and under counter
chiller without first isolating them from the power supply.
!
• FOR CONTINUED SAFETY OF THIS APPLIANCE IT MUST BE INSTALLED,
OPERATED AND MAINTAINED IN ACCORDANCE WITH THE
MANUFACTURER’S INSTRUCTIONS.
SECTION 3 WARNINGS & REGULATORY INFORMATION
