13
Program Settings
Controls
Cancel and Standby Mode
When the blender is plugged in but not in operation, the display reads
OFF
to
indicate Standby mode.
Press
Cancel
to stop a Smart Program at any time. The blender returns to
Standby mode.
Start/Pause
Press to begin a selected Smart Program. Once the Smart Program has begun,
press
Start/Pause
to pause a Smart Program at any time. Display indicates
-P-
when paused. Press
Start/Pause
again to resume the program from where it was
paused.
−
/
+
Use to adjust the cooking or blending time, the cooking temperature, and the
blending speed. Press and hold either – or + to adjust the timer quickly.
Pulse
Pulse motion blending with adjustable speed. Refer to
for details.
Clean
Fixed-pattern pulse blending for easy cleaning. Refer to
for details.
Manual Keep Warm
The Keep Warm setting may be turned on manually to reheat the contents of the
pitcher. Keep warm may only be used with the glass pitcher.
1.
When in Standby, press
Keep Warm
to turn the setting on.
2.
When the timer flashes, use the − / + buttons to adjust the warming time from
00:30
minutes to
02:00
hours.
3.
To adjust the temperature, press
Keep Warm
again. When the temperature
flashes, use the − / + buttons to set the temperature from
140–180ºF
/
60–80ºC
.
Note:
Temperature adjustments are saved to the Keep Warm setting after pressing
Start/Pause.
4.
Press
Start/Pause
to activate Keep Warm. The blender gently stirs every
minute to ensure temperature consistency and avoid scorching.
For details on automatically keeping food warm after cooking, refer to
.
