Instant Upright Span 300 Series, Инструкция по эксплуатации, Страница: 2 / 47

2
SAFE WORKING LOADS AND WORKING HEIGHTS
The safe working load at each level of platform is 360kg evenly distributed, regardless of whether one or two
platforms are installed. Therefore, even if two platforms are installed side by side, total cumulative load shall
not exceed 360kg distributed.
The total loading on the tower structure should not exceed 720kg. Normal maximum platform height for
indoor use is 12m for Double Width, and 8m for Single Width. For outdoor use, the maximum height is 8m for
Single and Double Widths.
ASSEMBLY PROCESS
1. Preparation
• Locate the tower level adjusters on each leg at 10cm
(4 inches) from the bottom of the leg.
• Unlock the interlock clips on all frames.
• When installed, always move the interlock clip to the
“locked” position.
• Sort the braces into horizontal and diagonal braces -
the diagonals are slightly longer.
• Unlock the brace locks.
10cm
Unlocked
Locked
Unlocked
Locked
2. Base
Step 1: Install castor into adjustable leg.
Step 2: Ensure interlock clips are released from the base
frames (bottom frames)..
Step 3: Install castor / leg assembly to frame by pushing
the leg into the frame tube. This should be done
with manual force only, no tools.
Step 4: Lock castors before ascending any part of
the tower.
3. Locking down the platform (Windlock)
A windlock clip is installed on the platform at the hook.
This is locked as shown here.
Note the locking and unlocking position
for the castors as shown here.
Unlocked Locked
Unlocked Locked
NEVER STAND ON AN
UNGUARDED PLATFORM
WARNING