2x / 2.3 m
5
mm
?
Ø 18 mm
02.12.2019
0000000133
Connecting ceiling mounted pro
fi
les (Figure 1 a+b)
▪
String together the pendant profiles as depicted with the help of the
profile connector set (il 4033 LPV).
▪
To fix them, tighten the grub screws with an Allen key (SW 2) by hand.
For a lightproof configuration, seal the internal edges with
black
tesaflex
®
4163 tape (not included).
White profile design: in addition, tape over the black tape with white
tape of the same kind.
Sealing ceiling mounted pro
fi
les (Figure 2 a+b)
▪
Seal the front sides of the ceiling mounted profiles with an end cap.
▪
To fix the end caps, tighten the grub screws with an
Allen key (SW 2) by hand.
Shortening the ceiling mounted pro
fi
le (Figure 3)
If necessary, the ceiling mounted profile can be shortened to measure
on site.
In doing so, the following should be observed:
▪
Use a robust mitre saw with a saw blade for aluminium.
▪
When sawing, place a protective cover in the profile.
Creating a cable gland (Figure 4)
▪
To install the supply, make a borehole in the drilling slot.
The horizontal position for the cable gland depends on the
later placement of the installation profile and is to be taken from the
electrical engineer's documentation.
▪
Deburr the hole and install the cable grommet.
The cable grommet is a component of the end cap set.
Mounting the ceiling mounted pro
fi
le (Figure 4)
▪
With the help of the drilling slot in the ceiling mounted profile, prepare
holes for mounting in a grid that is appropriate for the mounting surface.
For each profile (2.3 m), at least one hole is included at the beginning
and
end.
▪
Feed the supply line through the cable grommet and, following that,
attach the ceiling mounted profile to the ceiling with the help of
mounting holes and appropriate screws.
Appendix
Technical data
Weight with light components
Ceiling mounted pro
fi
le small
4.0 kg / m
Ceiling mounted pro
fi
le large
5.2 kg / m
Max. pressure load in
100 N
Mounting light components
Max. pressure load in
100 N
Removal of light components
Warranty
We reserve the right to make technical and formal changes to the product
in the interest of technical progress.
We provide a warranty as provided for by law.
Please send the unit postage-free with a description of the defect to our
central customer service o
ffi
ce:
Instalighting GmbH
Hohe Steinert 10
58509 Lüdenscheid
Germany
Al
Instalighting GmbH
Hohe Steinert 10
D-58509 Lüdenscheid
Tel49 (0) 2351 65619-0
[email protected]
