instagrid ONE max, Руководство пользователя

Страница: 4 / 18

© 2022 instagrid All rights reserved
EN
4
• The instagrid ONE max and its accessories must be checked for damage prior to each
instance of commissioning. When doing so, the correct functioning of the LED display
[5] must be ensured, see [section 5.2] . In the event of damage, TRANSPORT mode (see
[section 5.2.4] ) must be activated by turning the rotary switch [3] to

. A damaged or
defective instagrid ONE max must not be operated. The customer service department must
be contacted immediately, see [section 10] .
• The connecting of loads to the outlets of the instagrid ONE max [4 | 9] which continuously
feed power into the supply grid (e.g. plug-in solar panels) may lead to damage to the
instagrid ONE max and loads.
• The instagrid ONE max corresponds to protection class II and must not be earthed in
operation.
• Local regulations governing both the erection of low-voltage systems and the safe
operation of electrical loads must be complied with at all times.
• All connected cables must be routed so that they cannot get crushed by objects and
nobody can stand on them.
• The instagrid ONE max must only be connected to the mains using the enclosed charging
cable. Alternatively, a cable of identical design can be used. If you have any questions in this
regard, please refer either to an electrical specialist or contact instagrid; see [section 10] .
• Do not operate the instagrid ONE max if the power cable exhibits a defect or the insulation
is damaged. Protect the power cable so that it can neither become crushed, kinked nor
damaged in any other way. In particular, pay attention to the power plug and the charging
port [8] on the instagrid ONE max. A replacement cable can be sourced directly from
instagrid; see [section 10] .
• The instagrid ONE max can only be disconnected from the mains via the charging cable
(see [section 1] ), which must always be easily accessible for mains disconnection.
• The instagrid ONE max must not be used as a step or climbing aid.
• The protective caps of unused ports must be closed.
• The implementation of prescribed regular checks must be ensured and, in particular, no
defective loads may be used with the instagrid ONE max.
• Prior to activating the instagrid ONE max, you must ensure that connected loads are
switched off.
• Prior to connecting a load to the instagrid ONE max, you must ensure that it is switched
off.
• Loads connected to the instagrid ONE max must always be switched off after operation.
• The instagrid ONE max must not be used to operate life-sustaining medical loads.
• The instagrid ONE max must not be cleaned with water jets. In particular, the use of
pressure washers is not permitted.
• The instagrid ONE max must be prevented from coming in contact with chemicals, fuels
and lubricants.
• Operation of the instagrid ONE max should always be monitored by an experienced user,
especially if minors, inexperienced adults or people with disabilities / impairments are using
the instagrid ONE max.