InstaBox D10, Руководство пользователя

Страница: 11 / 13

IMPORTANT NOTES ABOUT WIRELESS CHARGING
a. If your device does not support wireless charging,
please purchase a wireless charging case separately.
b. Use only the approved power supply, otherwise, it will
cause danger.
c. Do not put a wireless charging case on the unit
separately, which may cause the charging surface too hot
and then cause fire disaster. It may cause serious burns or
device failure.
d. To charge a device without wireless charging function,
please put on a wireless charger case for your device,
then put it on the unit for wireless charging.
e. Do not put any foreign objects including metal, magnetic
absorbers and IC cards in the charging detective area,
which may cause abnormal charging or damage the unit
because of too much heat.
f. Please take always the device from the charging area
when the device is fully charged.
g. Please place the device on the charging area correctly
to make sure the wireless charging works properly.
h. Over 6mm thickness phone case may result in charging
intermittently or discontinued. Please take off the phone
case before charging.
j. During wireless charging, if connecting power supply to
the phone device, it will stop the wireless charging.
ADJUSTING DISPLAY BRIGHTNESS
Repeatedly press to select the
desired level of display brightness (High-Medi-
um-Low-Off).
USB CHARGING
To charge your USB-compatible devices, plug them
in the USB port on the rear of the unit and turn the
unit on.
The charging symbol will light up to indicate
charging. The symbol will disappear from the
display when the device is fully charged.
Equipped with a USB charging port, the maximum
charging current is 1A. Support Android phones,
Apple phones, Apple watches and other digital
devices. Ipad charging current is up to 1.6A.
BACKUP BATTERY
The battery used for the unit is one CR2032
battery(included). You can only use AC power as
power supply. The battery is only for backup
purpose.
If the system is unplugged or if a power failure
occurs, the clock and alarm time settings of the unit
will be erased unless there is a battery
in the unit.
WIRELESS CHARGING
Put the Wireless Charging receiver-enabled device
on the top of the unit, where the Wireless Charging
logo is printed. During wireless charging, the
symbol will be on the display. It will disappear from
the display when the device is fully charged. The
symbol begins to flash quickly when abnormal
charging happens.
8