FOR USE BY QUALIFIED PERSONNEL ONLY
- 2 -
Congratulations!
Your selection of the Insta Graphic Systems heat seal
machine is a sound business decision. Insta equipment is
the result of the highest quality engineering and time-
tested design. Your new machine combined with Insta’s
reputation of innovation in the heat-seal industry, insures
the continuing capability of delivering the best-decorated
substrates possible.
This manual describes installation, operation, and
maintenance procedures for your new model 101
machine.
Your model 101
machine will have a long
trouble-free life. Read this manual. Keep it with your
machine; it's your key to proper operation and lasting
service.
Installation
DOMESTIC
Use a 15 amp AC circuit. Only industrial
weight extension cords with proper wire
size should be used: size 16/3 wire for
distances up to 25 feet, and size 14/3 for
distances up to 50 feet.
INTERNATIONAL
Only industrial extension cords with
proper wire size (2.5 mm sq.) shall be
used.
IMPORTANT
The appliance must be plugged into a
proper receptacle of the proper size and
rating. Equally important, the line
voltage must be able to accommodate this
appliance as well as
other appliances
operating on this circuit
.
Specifications
Voltage
120 Volts AC
50/60 Hertz
Model 101
1200 Watts
10.0 Amps
Voltage
230 Volts AC
50/60 Hertz
Model 101
1200 Watts
5.2 Amps
Weight Model 101
29 Pounds (13.2 KG)
Limited Machine Warranty
Insta Graphic Systems warrants this heat seal machine,
when operated under normal conditions, to be free from
manufacturing defects in material and workmanship for a
period of one year on parts (lifetime on the upper heating
element) and 90 days on labor from the invoice date.
This warranty will be effective only when Insta authorizes
the original purchaser to return the product to the factory
in Cerritos, California freight prepaid, and only when the
product upon examination has proven to be defective.
This warranty does not apply to any machine that has
been subjected to misuse, negligence or accident.
Insta shall not be liable for the injury, loss or damage,
direct or consequential, arising out of the use or the
inability to use the product.
No claim of any kind shall be greater in amount than the
sale price of the product or part to which claim is made.
This is the sole warranty given by the company, it is in
lieu of any other warranties, expressed or implied, in law
or in fact, including the warranties of merchantability
and fitness for a particular use, and is accepted as such
by the purchaser in taking delivery of this product.
Operation
1.
Push
ON/OFF
switch to
ON
position. Set desired
temperature and lift handle so that the upper platen
arm is away from lower platen.
CAUTION
The temperature adjustment knob gets very
hot during operation. Adjust only when
machine is cold.
2.
Allow the machine to warm up for approximately 20
minutes. When the selected temperature is reached,
the neon lamp on the power switch will cycle on and
off.
3.
Set the desired pressure by adjusting the pressure
adjust knob on the top-center of the machine. To
reduce pressure, turn knob clockwise.
4.
Place the substrate on lower platen. Smooth out all
wrinkles.
