Insta InstaLight Vario, Руководство по эксплуатации

Страница: 23 / 40

GB
Connecting LEDTRIX
Figure 6: Connecting LEDTRIX bus 1 and 2
￭ Connect the LEDTRIX bus 1 and 2 as shown (Figure 6):
The terminals for LX1+ and LX2+ are electrically connected in parallel. For this reason, if using
two separate power supplies for LEDTRIX bus 1 and 2, a type A separating filter may only be
used on one bus.
The dimensioning rules of the LEDTRIX system apply. These are described in the documenta-
tions of the LEDTRIX actuators used (e.g. LEDLUX LX linear/plane).
LEDTRIX patching
The instalight Vario possesses fixed LEDTRIX patching, which is designed to activate luminaires with
RGBW, RGB or Tunable White, according to the selected mode.
The channel assignments shown in the tables apply separately to the outputs LX1 and LX2.
LEDTRIX channel mapping (RGBW)
Subscriber no. LX channel Parameters
1 1...4 R/G/B/W (0...255)
2 5...8 R/G/B/W (0...255)
...15 57...60 R/G/B/W (0...255)
7