49
Chapter Six Install Operating System
(8) Enter the interface of “Custom Setup” and click <Next> to continue;
(9) Enter the interface of “Ready to Install the Program”, and click <Install> to
continue;
(10) The installation program starts to install; when the installation is completed,
click <Finish> in the interface of “InstallShield Wizard Completed” and the system
pops up a prompt that you need to restart the server so that the settings can take effect.
Take all the disks out of the drive, and select <Yes> to restart the server.
Note: in the above Video driver installation, some installation steps maybe differ-
ent because of the different Windows 2008 systems to install, please follow the actual
installation steps.
19. Install SAS controller driver
(1) Enter the Windows system, click in turn <Start>→<Administrative
Tools>→<Computer Management>; in the interface of “Computer Management”, and
open “Device Manager”;
(2) In the interface of “Device Manager”, select the <SAS Controllers> in <Other
devices>, right click and select
(3)Enter the interface of “Update Driver Software”, when the system asks “How
do you want to search for driver software?”, please select<Browse my computer for
driver software>;
(4) The system prompts “Browse for driver software on your computer”, after put-
ting the Inspur system driver CD into the optical drive, and click the <Browse> button
in the back of “Search for driver software in this location:”select the path of the driver
in the CD: \driver\SCU\driver\win_64 (if it is 32bit system, please select \driver\SCU\
driver\win_32), and then click <OK>. Click <Next> to continue, the system begins to
install the driver automatically.
(5) The system prompts “Windows has successfully updated your driver soft-
ware”, click <Close> to finish the installation of Intel(R) C600 Series Chipset SAS
RAID (SATA mode) driver.
6.4 Manually Install Red Hat Enterprise Linux 6.1
6.4.1 Preparation Prior to the Installation
● Installation CD for Red Hat Enterprise Linux 6.1 (1 piece of DVD)
6.4.2 Installation Steps
1. Power up and start the system, put the installation disk into the optical drive (here
