manualshive.com logo in svg

Inspur NP5570M4, Руководство пользователя, Страница: 35 / 84

Поделиться
Скачать
Inspur NP5570M4 Скачать руководство пользователя страница 35

　３１

BIOS Configuration

System displays the following menu options:

Name

Please enter a volume label name less than 16 characters without containing any 
special character.

RAID 
Level

Please select RAID volume level, if no volume has been created at present, there’re 
four volume levels of RAID0 (Stripe), RAID1 (Mirror), RAID10 (RAID0+1) 
and RAID5 (Parity) for selection, please select volume level according to actual 
requirements. 
RAID0: This RAID volume is allowed to be made on 2 or above hard disks.
RAID1: This RAID volume is allowed to be made on 2 hard disks.
RAID10: This RAID volume is allowed to be made on 4 hard disks, which is only 
available when hard disk quantity is 4 or above.
RAID5 (Parity): This RAID volume is allowed to be made on 3 or above hard disks.

Disks

Select hard disks to make RAID volume, press enter after this option is selected, 
system will enter hard disk selection interface, please select hard disks to make 
RAID volume using space key accordingly, and then press enter to return to volume 
create menu.

Strip Size Please select strip size, only RAID0 and RAID5 volumes could select this option.
Capacity Set volume capacity, and the default value is the max. volume capacity.

After completing the above configuration, please select [Create Volume], and press enter, 
system prompts: “WARNING

：

ALL DATA ON THE SELECTED DISKS WILL BE LOST. 

Are you sure you want to create this volume ?(Y/N):”.
To create an RAID volume, please enter “Y”, a volume will be created, and all data on the 
selected disk will be lost.
Otherwise, please enter “N”, to exit volume creation.
Here we enter “Y” to create an RAID volume, after creation completed, return to SATA Host 
RAID configuration main interface, and the created RAID volume will be displayed in RAID 
volume.

b) 

Delete RAID Volume Menu

Содержание NP5570M4





















































































Отзывы:

Нет отзывов