Inspur NF5170M4 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 112

Inspur NF5170M4 Скачать руководство пользователя страница 60

54

System displays the following menu options:

Name

Please enter a volume label name less than 16 characters without containing any

special character.

RAID Level

Please select RAID volume level. If no volume has been created at present, there

are four volume levels of RAID0 (Stripe), RAID1 (Mirror), RAID10 (RAID0+1)

and RAID5 (Parity) for selection. Please select volume level according to actual

requirements.

RAID0: This RAID volume is allowed to be made on 2 or above hard disks.

RAID1: This RAID volume is allowed to be made on 2 hard disks.

RAID10: This RAID volume is allowed to be made on 4 hard disks, which is only

available when hard disk quantity is 4 or above.

RAID5 (Parity): This RAID volume is allowed to be made on 3 or above hard disks.

Disks

Select hard disks to make RAID volume, press enter after this option is selected.

The system will enter hard disk selection interface. Please select hard disks to make

RAID volume using space key accordingly, and then press enter to return to volume

create menu.

Strip Size

Please select strip size, only RAID0 and RAID5 volumes could select this option.

Capacity

Set volume capacity, and the default value is the max volume capacity.

After completing the above configuration, please select [Create Volume], and press enter. The
system should then prompt: “WARNING

：

ALL DATA ON THE SELECTED DISKS WILL BE LOST. Are

you sure you want to create this volume ?(Y/N):”.
To create a RAID volume, please enter “Y”. A volume will be created, and all data on the
selected disk will be lost. Otherwise, please enter “N”, to exit volume creation.
Following, we enter “Y” to create an RAID volume. After the creation is completed, return to
SATA Host RAID configuration main interface. The created RAID volume will be displayed in
RAID volume.

«
...
58
59
60
61
62
...
»

Содержание NF5170M4

















































































































Отзывы:

Нет отзывов