20
Disturbed by electromagnetism
Stay away from electromagnetism
4
Incline doesn’t work
The motor wire is not well
connected
Open the motor cover and reconnect it
5
Running belt runs
faster or slower than
what has been
displayed
Unadjusted
Readjust it
6
Running belt slips
Running belt is not tight enough
Please
read
“Maintenance:
The
adjustment steps for poly V-belt /
Adjustment running belt“
7
Running belt is
deflected
The running belt is unadjusted.
Please
read
“Maintenance:
The
adjustment
steps
for
running
belt
deflection”
8
Displayed E01 on the
screen
The sensor wire or motor are
broken
Remove the motor cover and change the
sensor wire, motor in return
9
Displayed E02 on the
screen
over power voltage protection
Use normal voltage.
10
Displayed E03 on the
screen
over current protection
Check whether it is overloading
Check whether the drive motor can run
normally. If not, replace motor.
11
Displayed E04 on the
screen
The motor is not in power
The motor wire are not connected well or
the motor are broken
12
Displayed E06 on the
screen
Connection error
Changing the upper or lower connection
line
13
Displayed E09 on the
screen
Incline error
The incline motor wire are not connected
well or the incline motor are broken
14
Displayed E0P on the
screen
Speed error
Setting parameter wrong or sensor wire
broken
15
Displayed E0C on the
screen
Short-circuit protection
PCB MOS broken or motor broken
16
Displayed E07 on the
screen
Safety key off
Put safety key on the meter or change the
safety key or reed pipe for safety key
17
Displayed E0E on the
screen
Eeprom error
Upper or lower communication line
broken or PCB broken
If you still can’t solve the problems after taking the solutions above, we hope that you can contact our dealer or
company as soon as possible.