Insportline Strippy, Руководство пользователя

Страница: 5 / 11

5
NOTE: The pedometer will automatically back to STEP mode if there is no input for 10 seconds in the
SETUP mode.
CALCULATING STRIDE LENGTH
In order to calculate accurate DISTANCE traveled, you need to measure and input your stride length.
How to calculate your stride length:
To properly calculate your stride length, measure a predetermined distance in feet. Correct stride
distance is defined as a tip of your foot to another one. To measure the correct average stride
distance, divide the total distance of ten steps you walked / run by the number of step (10).
Calculate the stride distance in the following way: You walk 6.2 meters, 6.2m (total distance) / 10
(number of steps) = 0.62m (62cm).
NOTE: Unlike the conventional pedometer, this pedometer using a 3D motion sensor that can detect
fine body step movement without mechanical sensor, so no rattle sound will create.
NOTE: To avoid inaccurate counting, the pedometer only will show the number of steps taken after
continuous steps fo
r 5 seconds, This means that the pedometer won’t display the number taken during
the first 5 seconds you walk. All the steps taken will be counted and displayed 5 seconds afterward.
OPERATING INSTRUCTIONS
STEP MODE

The default mode for the device is Step .

In STEP mode, the first line display the total number of steps taken that day.

The time in 12-Hour or 24-Hour format is displayed at the bottom of LCD screen.

Press and hold SET button for 2 seconds to enter into Time/Weight/Strides/Target SETUP
mode.

Press and hold RESET button for 2 seconds to clear the data.

Steps taken, distance traveled, calories burned, total exercise time will be saved to MEMORY
mode up to 30 days and cleared to zero at midnight automatically.
DISTANCE MODE

Press MODE to enter into Km/Mile .

Press and hold RESET button for 2 seconds to clear the data.