Insportline inCondi T70i II, Руководство пользователя

Страница: 33 / 41

33
•
The running belt can get out of centre with time. First let the machine run automatically for
automatic centralisation. If it is not successful, you can adjust the position by screwing the bolt
shown in the images below. If the running belt has shifted to right, you need to tighten the
screw on the right of the belt or loosen the screw on the left. If the belt has moved to the left,
do it oppositely.
•
Belt slipping: Adjust bolts according to the diagram below. When adjusting the two sides make
sure each adjustment is the same on either side of the machine. We recommend adjusting by
half a turn until the running belt does not slip or deviate. Don’t tight it too much.
WARNING: To prolong product lifespan, we suggest switch off the treadmill for about 10 minutes after
2 hours of exercising. Too loose or too tight belt could damage this machine. Keep a suitable
tightness. Grasp the running belt and pull it up to certain distance until you cannot pull it anymore. If
the distance is between 50-75 mm, the tightness is proper.