Special Safety Precautions
•
Power source:
•
Choose a place within reach of
a socket when placing the treadmill.
•
Always connect the appliance to a socket with a grounded circuit and no other appliances
connected to it. It is recommended not to use any extension cords.
•
A faulty grounding of the appliance can cause the risk of eletrical shocks. Ask a qualified
electrician to check the socket in case you do not know if the appliance is grounded appropriately.
Do not modify the plug provided with the appliance if it is not compatible with your socket. Ask a
qualified electrician to install a suitable socket.
•
Sudden voltage fluctuations can seriously damage the treadmill.
Whether to change or switch on
and off other appliances can cause peak voltage
s, over-voltage or interference voltage. To limit the
danger of damage to the treadmill, it should be equipped with an over-voltage protective device
(not included).
•
This appliance is designed for use with ~220 - ~240 Volt rated voltage.
•
Keep power cord away from the
carrying roller.
Do not leave the power cord below the
striding belt.
Do not use the treadmill with a damaged or worn out power cord.
•
Unplug before cleaning or engaging in maintenance work. Maintenance should only be done by
authorised service technicians, unless otherwise stated by the manufacturer. Ignoring those instructions
would automatically void the warranty.
•
Inspect the treadmill before every use to make sure that every part is operational.
•
Do not use the treadmill outdoors, in a garage or under any kind of canopy. Do not expose the treadmill
to high humidity or direct sunlight.
•
Never leave the treadmill unattended.
•
If the supply cord is damaged , it must be replaced by the manufacturer , its service agent or similarly
qualified persons in order to avoid a hazard .
•
Make sure the striding belt is always tense. Start the striding belt before stepping on it.
Assembly
•
Before starting with the assembly of this fitness device, carefully read through the set up steps as of
page 9. We also recommend that you view the assembly drawing prior to assembly (page 7).
•
Remove all packaging material and place the individual parts on a free surface. This will provide you
with an overview and will simplify assembly.
•
Use the parts list (page 5) to check that all components have been supplied. Dispose of the packaging
material only after the trainer is fully assembled.
•
Please consider that there is always the risk of injury when using tools and carrying out technical
activities. Please proceed with care when assembling the device.