Insportline IN 21320, Руководство пользователя

Страница: 23 / 29

23
Computer not working
Wires from the computer and
bottom
control board not
properly connected.
Check wire connections from the
computer to the control board.
Transformer is damaged.
If the transformer has become
damaged,
contact customer
service.
E01 & E13: Communication
failure
No communication from console
to control board.
Check wire connections from the
computer to the control board
and replace wires and/or control
board if necessary.
E02: Burst clash protection
Incoming voltage is lower than
50% of the required voltage.
Check the incoming voltage
against the required voltage.
Check wire connections to the
motor. Check the control board,
replace if necessary.
E05: Current overload
protection (Self Protecting
System))
The incoming voltage is too low
or too high. The control board is
damaged.
Restart the treadmill. Check if
the incoming voltage is correct.
Check the control board, replace
if damaged.
A moving part of the treadmill is
stuck and therefore the motor is
unable to rotate properly.
Inspect the moving parts of the
treadmill to ensure that they are
operating correctly. Check the
motor, listen for strange noises
and check for a burning smell.
Replace the motor if necessary.
E06: Motor error
The motor wire is not connected
or the motor is damaged.
Check motor wires to see if the
motor is connected. If the wire
has
been punctured or
damaged, you will need to
replace it. If the problem is not
solved, you may need to replace
the motor
E08: Control Board Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control board
is connected. If the wire has
been punctured or damaged,
you will need to replace it. If the
problem is not rectified, you may
need to replace the control
board.
E10: Motor abnormality
The motor is damaged or a
moving part of the treadmill is
stuck and therefore the motor is
unable to rotate properly.
The torque is too big, please
adjust the torque. Check moving
parts of the treadmill to ensure
that they are operating correctly.
Replace the motor if necessary.
Lubricate the treadmill.