9
5. Attach the left lower handlebar (I-3) to the axle using a plastic washer (H-8), a flat washer (H-
7) and a nylon screw (H-6).
6. Attach the right lower handlebar (I-4) to the axle using a plastic washer (H-8), a flat washer (H-
7) and a nylon screw (H-6).
KROK 4
1. Take both pedal arms (F-1, F-2) and pass them through the corresponding crank arms (F-7/F-
8).
2. Attach the right and left pedal arm (F-1, F-2) to the corresponding pivot collars referencing the
orientation shown in the drawing. Hardware used per side: linkage arm (F-4), flat washer (F-
5), screw (F-6).