background image

 

Special tips: 

1.  Before installation and operation, please read this operation manual carefully. 

2.  Please save this manual for future reference. 

3.  Product may vary slightly from the item pictured due to model upgrades. 

SAFETY INSTRUCTIONS 

WARNING 

–  Read  all  instructions  before  using  this  treadmill.  It  is  important  your  treadmill 

receives  regular  maintenance,  you  can  further  its  longevity  this  way.  Failing  to  regularly 
maintain your treadmill may void your warranty. 

Danger: 

To reduce the risk of electric shock, disconnect your treadmill from the electrical outlet prior 

to cleaning and/or service work. 

DO  NOT  USE  AN  EXTENSION  CORD.  DO  NOT  ATTEMPT TO  DISABLE  THE  GROUNDED  PLUG 
BY USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET. 

1)  Install the treadmill on a flat level surface with access to correct voltage and frequency and a 

grounded outlet. 

2)  Do not operate the treadmill on deeply padded, plush or shag carpet.  You may damage both 

the carpet and the treadmill. 

3)  Do not block the rear of the treadmill. Provide a minimum of 0.6 meter clearance between the 

rear of the treadmill and any fixed object. 

4)  Place your unit on a solid, level surface when in use. 

5)  Never allow children on or near the treadmill. 

6)  When  running,  make  sure  the  plastic  clip  is  fastened  to  your  clothing.  It  is  for  your  safety, 

should you fall or move too far back on the treadmill. 

7)  Keep hands away from all moving parts. 

8)  Never operate the treadmill if it has a damaged cord or a plug. 

9)  Keep the cord away from heated surfaces. 

10) Do  not  operate  where  aerosol  spray  products  are  being  used  or  where  oxygen  is  being 

administered. Sparks from the motor may ignite in a highly flammable environment. 

11) Never drop or insert any objects into any openings. 

12) 

No adjustable part should be protruding for it could limit the user’s range of movement. 

13) The treadmill is intended for in-home use only and not suitable for long time running. 

14) To disconnect, turn all controls to the off position, remove the safety key, and then remove the 

plug from the outlet. 

15) 

The pulse sensors are not medical devices.  Various  factors, including the user’s movement, 

may  affect  the  accuracy  of  heart  rate  readings.  The  pulse  sensors  are  intended  only  as 
exercise aids in determining heart rate trends in general. 

16) Use the handrails; they are for your safety. 

17) Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on 

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue. 

18) Allowed te

mperature: 5 to 40°C. 

19) 

Weight limit:

 120 kg 

20) 

Category: 

HA

 

(according to EN957 norm) suitable for home use 

21) 

WARNING!

  The  heart  rate  frequency  monitoring  may  not  be  completely  accurate. 

Overexertion during training can lead to a serious injury or even death. If you start to feel faint, 
stop the exercise immediately. 

Содержание IN 13080
























Отзывы: