Insportline IN 10895 inCondi UB20m, Руководство пользователя, Страница: 14 / 21

14
POWER ON/OFF
Power on: LCD will display all segments with Beep sound as Drawing A.
Power off: Without any signal been transmitted into the monitor for 4 minutes, and the monitor enter
to SLEEP.
OPERATION
1. When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD will
display all segments with Beep sound for one second and enter to SCAN mode as Drawing B.
2. With any signal been transmitted into the monitor, the value of TMR, DST, and CAL will start
to count up as Drawing C.
3. Without any signal been transmitted into the monitor for 4 minutes, the monitor will enter to
SLEEP mode.
TROUBLE SHOOTING

When the display shows Drawing D, it means the batteries need to be changed.

If there is no signal when you pedal, please check if the cable is well connected.
Drawing A
Drawing B
Drawing C
Drawing D
INSTRUCTIONS
To operate , first you need to connect your 3c device and computer through 3.5mm cable.
Then download from Google play or App store.
Note:
Download in Google play, system requirements: 480*800, 720*1280,
1280*800 Android 2.2 or above.
Support Android devices: Samsung Galaxy Note 1~4, Samsung Galaxy S2~5,
HTC NEW ONE, HTC D316d, HTC M8, SONY Z ULTRA.
Download in APP STORE, system requirements: iOS 5.1.1 or above.
Support iOS devices: iPhone4s, iPhone5, iPhone5s, iPhone6, .