9
ASSEMBLY
STEP 1
1.
Remove the six M8x15 screws (41), the four washers Ø8xØ16x1.5 (17) and the two washers
Ø8x16x16.5 (42) from the rear main frame (2). Unscrew the screws with the S6 Allen key.
Connect the Pulse sensor cable A (47) from the front main frame (1) to the Pulse sensor cable
B (35) from the rear main frame (2).
Connect the front main frame (1) to the rear main frame (2) with six M8x15 screws (41), four
washers Ø8xØ16x1.5 (17) and two washers Ø8xØ16x1.5 (42) from the front main frame (1)
that were removed. Tighten the screws using the S6 Allen key.
2. Place the front stabilizer (4) in front of the front main frame (1) and align the screw holes.
Connect the front stabilizer (4) to the front main frame (1) with two M8x70 bolts (45), two large
washers
Ø8xØ20x2.0 (16) and two M8 nuts (18). Tighten the nuts with the supplied Hex
wrench with Phillips screwdriver.
Place the rear stabilizer (5) behind the rear main frame (2) and align the screw holes.
Connect the rear stabilizer (5) to the rear main frame (2) using two M8x70 bolts (45), two large
washers
Ø8xØ20x2.0 (16) and two M8 nut (18). Tighten the nuts with the supplied Hex
wrench with Phillips screwdriver.
Содержание Greod IN 19895
Страница 1: ...USER MANUAL EN IN 19895 Recumbent inSPORTline Greod...
Страница 7: ...7 DIAGRAM...
Страница 8: ...8...