Insportline Gilavar, Руководство пользователя

Страница: 19 / 25

19
deflected
8
Displayed E01 on
the screen The sensor wire or motor
are broken Remove the motor cover and change the
sensor wire, motor in return
9
Displayed E02 on
the screen over power voltage
protection
Use normal voltage.
10 Displayed E03 on
the screen over current protection
Check whether it is overloading
Check the motor, replace if damaged.
11
Displayed E04 on
the screen Motor error Check whether the drive motor can run
normally, replace motor.
12
Displayed E06 on
the screen
Connection error
The motor wire is not connected right, or
the motor are broken
13
Displayed E09 on
the screen Incline error Changing the upper or lower connection
line
14
Displayed E0P on
the screen Speed error The incline motor wire is not connected
right, or the incline motor are broken
15
Displayed E0C on
the screen Short-circuit protection Setting parameter wrong or sensor wire
broken
16
Displayed E07 on
the screen Safety key off PCB MOS broken, or motor broken
17
Displayed E0E on
the screen Eeprom error Put safety key on the meter or change the
safety key or reed pipe for safety key
If you still can’t solve the problems after taking the solutions above, we hope that you can
contact our dealer or company as soon as possible.