![background image](http://html1.mh-extra.com/html/insportline/galdigar/galdigar_user-manual_2069319013.webp)
13
DISPLAY
Display displays 6 functions:
•
distance
•
calories
•
time
•
incline
•
pulse
•
speed
– By default it displays speed, in resistance mode it displays resistance value, in
vibration mode it displays vibration value.
Default value
Setting up default
value
Limit to set value
Max. display
value
Time (min:sec)
0:00
----
----
0:00
– 99:59
Speed (km/h)
0,0
----
----
1
–20 km/h
Incline
0
----
----
0
–15
Distance (km)
0,0
----
----
0,0
– 99,9
Calories (kcal)
0,0
----
----
0
–999
BUTTONS
START / PAUSE
– If the treadmill is paused, press the button to lower the belt and the speed is kept
to a minimum. When the belt is in operation, press the button to pause the treadmill.
STOP
– When the treadmill is in operation, pressing the button will stop the treadmill and reset all
data. If you press the button while the treadmill is paused, press the button to reset the data.
SPEED +/-
– Press to adjust the speed. You can also use the buttons to adjust values and parameters
in the settings. When the program is running, you can adjust the speed by 0.1 by pressing the button;
a resistance of 0.1 or a vibration of 0.1 according to the selected program. Hold down to adjust values
faster.
INCL +/-
– Press to change the incline of the treadmill. Hold down to adjust values faster.
RUNNING
– If the treadmill is paused, press the button to turn on the treadmill.
MANUAL
– If the treadmill is paused, press the button to turn off the treadmill.
RESISTANCE
– If the treadmill is paused, press the button to start the resistance program.
VIBRATION
– If the treadmill is paused, press the button to start the vibration program
SAFETY KEY
The safety key consists of a key, buckle and nylon thread. In the event of a breakdown or emergency,
pulling the key immediately stops the treadmill. The console will not be operable, the display will show
“---” and a beep will sound. If you insert the safety key back, the treadmill will start functioning
normally.
HEART RATE TEST
Turn on the treadmill and grasp both handles with pulse detectors. Stand on the belt for the most
accurate measurements. The measurement should be longer than 30 seconds. The value should be in
the range of 50-200 bpm.
The data are for reference only and are not for medical or therapeutic purposes.
Содержание Galdigar
Страница 1: ...USER MANUAL EN IN 20166 Treadmill inSPORTline Galdigar ...
Страница 5: ...5 DIAGRAM ...