12
Step 10
Attah the bracket Z to the top pole W with bolts, washers, and nuts H1, H2, H3, H4. Bushing H3 must
be inserted to the top pole W. Bolt H1 tighten after attaching rods S, T.
Attach the rods S and T to the bracket Z as shown with bolts, washers, and nuts B1, B3, B4, D1, D2,
D3, D4. The bushing B2 must be in the holder Z so that the bolt B1 does not move.
Then attach outer height adjustment rod EE on the board holder rod T (longer) with bolts, washers and
nuts A1, A2, A3, A4, bushings A2 must be between rod EE and rods T.
Step 11
Attach the inner part of the lifting rod to the holder Q with bolts, washers and nuts K1, K2, K3.
