kanga polycarbonate tray
Item Number
11060-10110
Kanga Abductor Pommel, Flip Down, 10”
11060-10112
Kanga Abductor Pommel, Flip Down, 12”
11060-10114
Kanga Abductor Pommel, Flip Down, 14”
Tools Needed:
3/8 open end wrench.
Contents in package (qty):
(1) Poly tray with toggle plates and toggle clamps
(attached)
1.1
Toggle clamp adjustment; if necessary to adjust toggle
clamps, slightly loosen the (2) 10-24 pressure nuts holding
the toggle clamp to the underside of the toggle plate.
Slide the toggle clamp into new position and re-tighten
both 10-24 pressure nuts firmly to hold in place.
1.2
Repeat above step for opposite side
Your Inspired by Drive branded product is warrantied
to be free of defects in materials and workmanship for
the lifetime of the product for the original consumer
purchaser.
This device was built to exacting standards and
carefully inspected prior to shipment. This Lifetime
Limited Warranty is an expression of our confidence
in the materials and workmanship of our products
and our assurance to the consumer of years of
dependable service.
This warranty does not cover device failure due to
owner misuse or negligence, or normal wear and
tear. The warranty does not extend to non- durable
components, such as rubber accessories, casters,
and grips, which are subject to normal wear and need
periodic replacement.
If you have a question about your Inspired by Drive
device or this warranty, please contact an authorized
Inspired by Drive dealer.
Limited Lifetime Warranty
