STEP 1:
STEP 2:
(3)
(B)
(D)
(E)
(C)
(A)
(D) (C)
(2)
(2)
(1)
(2)
(2)
Attach Cross Support (3) to Leg Frames (2) using one Spacer (E), one Flat Washer (D), one Lock Washer (C)
and one Long Bolt (B) for each end of Cross Support (3).
DO NOT FULLY TIGHTEN BOLTS.
Attach Leg Frames (2) to corner blocks of Seat (1) using four Flat Washers (D), four Lock Washers (C) and four
Short Bolts (A) for each Leg Frame (2).
TURN BENCH OVER TO THE UPRIGHT POSITON. APPLY FIRM PRESSURE TO
ALIGN & FULLY TIGHTEN ALL BOLTS USING ALLEN WRENCH (F).
