manualshive.com logo in svg

Inspire SLEEP REMOTE, Руководство пользователя

Поделиться
Скачать
Inspire SLEEP REMOTE Скачать руководство пользователя страница 64

50 English

Inspire Sleep Remote

Connections to Additional Equipment

Anybody connecting additional equipment to medical 
electrical equipment configures a medical system and is 
responsible that the system complies with the requirements 
for medical electrical systems. 
Additional equipment connected to the sleep remote must 
comply with the respective IEC or ISO standards (for 
example IEC 60950 for data processing equipment such as 
personal computers). All configurations must comply with 
the requirements for medical electrical systems (see IEC 
60601-1-1 or clause 16 of the 3Ed. of IEC 60601-1, 
respectively). 
Local laws take priority over the requirements of this section. 
Contact your doctor or Inspire for additional information.

Do Not Modify 

Do not modify the sleep remote. Changes or modifications 
could void the user's authority to operate the equipment.

FCC Statements

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.

Содержание SLEEP REMOTE









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды