Inspire CBI, Руководство пользователя

Страница: 18 / 24

18
FUNCTIONS & OPERATION
1. Battery Installation
Install 2 AA 1.5V batteries in the battery case on the back of monitor.
(Whenever the batteries are removed, all the values will be reset to zero.)
2. Auto On/Off
When the user starts to pedal, the display will start automatically. After pedaling has stopped for over 256 sec, the display will
turn off, but the value of odometer will be stored. When the user starts pedaling again, the odometer will continue to count
incrementally.
3. Auto Scan
Press the MODE button until “SCAN” is displayed in the UPPER LEFT corner of the LCD. SCAN function will display all
values for TIME-CAL-ODOMETER-SPEED- DISTANCE. Each value will display for 6 seconds.
4. Speed
Shows the current training speed (MPH).
5. Distance
Accumulates the total distance from 0.0 up to 999.9 Miles. The user may preset a target distance by pressing SET button when
DIST is displayed (Do NOT pedal when setting target). Each increment is 0.1 Miles when distance is less than 100 Miles,
each increment is 1 Mile for distances between 100 and 999 miles. The unit counts down from the target to 0 when a target is
set. The computer beeps when the target DISTANCE is reached
6. Time
Accumulates total workout time from 00:00 up to 99:59. The user may preset a target TIME by pressing SET button when
TIME is displayed (Do NOT pedal when setting target). The unit counts down to 0 after target TIME is set. The computer
beeps when target TIME is reached.
7. Calories
Accumulates calorie consumption during training from 0 up to 9999 calories. The user may also preset a calorie target
before training by pressing SET when CAL is displayed (Do NOT pedal when setting target). Each incremental increase is 1
calorie until 1000, then each incremental increase will be 10 calories until 9990. When a calorie target is set, the computer
counts down to 0 calories. Computer beeps when calorie target is reached.
Note : This data is a rough guide and should not be used for medical treatment or analysis.
8. Odometer
Displays the total accumulated distance from 0.0 to 999.0 Miles. User may press MODE key to display the Odometer value.
9. Reset
Press and hold for 2 seconds to reset all values to zero (except ODOMETER).
Note:
1. If the computer displays abnormally, please remove and reinstall the batteries and try again.
2. Battery Spec: 1.5V UM-3 or AA (2PCS).