Insnrg GI 160 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 55

Insnrg GI 160 Скачать руководство пользователя страница 2

1

CONGRATULATIONS

ON YOUR PURCHASE

OF THIS PRODUC T.

THIS MANUAL HAS BEEN CAREFULLY DEVELOPED TO
GIVE YOU ALL THE INFORMATION YOU NEED TO GET THE
BEST VALUE FROM YOUR PURCHASE.

It is important that you read through the manual to identify the
key areas you need to understand, particularly the following:

•  Health and Safety Concerns
•  Installation requirements
•  How to operate the major features of the unit
•  The importance of maintenance
•  If you have a problem, what to trouble shoot before you

contact your professional

• Finally, your entitlements under your product warranty.

Insnrg have developed their product to provide you with the
ultimate experience and are sure you will be delighted with your
purchase.

Please note: This equipment must be installed in a location that allows
for regular maintenance and service by the pool owner and service
technicians. Insnrg will not put service technicians at risk of injury by
servicing difficult to access appliances.

«
1
2
3
4
...
»

Содержание GI 160
























































Отзывы:

Нет отзывов