3
4
Overview for screen:
3
1. Laser indicator 2. Indirect measure( Single Pythagoras/
Summary
3. Measure function(
4. Measuring reference
5. Add and subtract 6. Maximum display
8. Stakes
direction indicator 9. Main screen and unit
10. Countdown measuring 11. Memories
13. Units
7. Minimum display
12. Battery status
ISN-L70 is powered by two AA batteries. Remove battery cover
and observing correct polarity when install the batteries, then
close the battery cover.
Inserting the batteries:
Note: means the power in high level; means battery is about
1000 measure times left; twinkling means battery is low.
1
Turn on/off:
2
3
Distance measuring:
Laser activated
Note: Keeping instrument stable when measuring.
The laser will be turn off after measuring.
4
Add your measure:
of two Pythagoras/ Subtract of two Pythagoras)
Area measuring/ Volume measuring)
Operation
Before starting, please make sure battery is installed properly.
Short press to turn on, initial screen will flash seconds for
checking status and standby screen will be displayed. Long press
to turn off.
Laser will be emitted upon when you turn on. The laser will
switch off automatic in 30 seconds if there is no operation.
Laser unactivated
Short press to enable the laser if the laser is not activated,
then move the laser dot to your target. Short press to
measure and the result will be appeared on the screen.
Short press after your first measure to save into memory.
Short press again after your second measure and the result
will display on screen.
You can repeat the steps for more results.
